WATERJET WATERLINE
3/5 axis Entry level waterjet machine with 3/5 axes with integrated tank, bridge only on the short side.
The cutting system has the following characteristics:
► Integrated Steel Tank with Gantry Bridge Technology,
► 3-4-5 axis NC,
► Helical Rack & Pinion motion system with automatic lubricating system,
► for simple processing and pure waterjet cutting.
EDGE 5 axis ±55° with I.T.C. (Intelligent Tapering Control) technology and exclusive Touch Wave™ sensor for accurate continuous position calibration.
► Integrated Steel Tank with Gantry Bridge Technology,
► 3-4-5 axis NC,
► Helical Rack & Pinion motion system with automatic lubricating system,
► for simple processing and pure waterjet cutting.
EDGE 5 axis ±55° with I.T.C. (Intelligent Tapering Control) technology and exclusive Touch Wave™ sensor for accurate continuous position calibration.
| NET CUTTING AREA | X = 3.400 mm (11') Y = 1.650 mm (5' 1/2) Z = 200 mm (8") |
| INNER TABLE WORKING AREA | 3.800 mm x 1.800 mm (12' x 6') |
| OVERALL DIMENSIONS | 4.000 mm x 2.300 mm x h 1.800 mm (13' x 8' h x 6') |
| RAPID SPEED | 0 - 20 mt / min (0-67' / min) |
| WEIGHT | 2.000 Kg (5.000 lb) |
| PPOSITIONING ACCURACY | ± 0,1 mm (± 0,004") |
| REPEATABILITY | ± 0,05 mm (± 0,002") |
| BALLBAR Ø 300 mm (12”) | ± 0,1 mm (± 0,004") |
| WL 44 | 1.250 x 1.250 mm (4' x 4') |
| WL 512 | 3.400 x 1.650 mm (11' x 5' /2) |
| WL 612 | 4.000 x 2000 mm (13' x 5' 1/2) |