TruTool F 300

You can use the TruTool F 300 seam locker to work in sheet thicknesses of 0.03 - 0.05 in mild steel and lock straight as well as curved ducts.

For cost-effective work at the installation site

The TruTool F 300 is ideal for closing Pittsburgh seams on straight or curved ducts. You can work quickly with the quiet roll/glide process and achieve a tight connection. The sheet thickness range for this is 0.03 inches to 0.05 inches for mild steel. The adjustment to the sheet thickness is automatic.

Flange height and sheet thickness

Suitable for flange heights of 9 mm – 13 mm and for sheet thicknesses of 0.75 mm – 1.25 mm.

Excellent process reliability

Automatic adjustment to the sheet thickness gives you consistent seam results.

Area of application

With the TruTool F 300, you can close seams on straight and curved ducts.

Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² (minimum) 0.75 mm
Maximum sheet thickness, steel 400 N/mm² (Maximum) 1.25 mm
Flange height (B)  
Flange height (B) with sheet thickness 0.75 - 1.0 9 mm - 11 mm
Flange height (B) with sheet thickness > 1.0 - 1.25 11 mm - 13 mm
Radii  
Smallest inner radius (preformed) 150 mm
Smallest outer radius 300 mm
General  
Working speed (max.) 7 m/min
Nominal power consumption 550 W
Dimensions  
Length 285 mm
Height 358 mm
Weight  
Weight 5.5 kg

Order a call

Full Name: *

Phone: *