TruTool TF 350

You can use the power fastener to connect two or more metal parts without connecting elements. The process ensures a secure and corrosion-resistant connection point.

Fast and economical connection

Joining is the simplest and most cost-effective way of connecting two or more metal parts. With the TruTool TF 350 you can produce a form-fitting material connection with joints that are easy to reproduce using cold forming. Whether the workpieces are coated or uncoated is irrelevant. The TruTool TF 350 joins overall material thicknesses of 0.8 mm to max. 4 mm. The result is a long-lasting connection in one operation, without additional connecting elements.

Straight to the point

The connection point is secure and resilient and the joining points are resistant to corrosion.

No fasteners

No screws or rivets are used, which saves costs and simplifies handling

Perfect surface in one operation

The joining quality does not depend on whether surfaces are coated or uncoated.

120 joining points per minute

Simple single stroke activation with consistent strength and connection quality.

Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 3.5 mm
Maximum sheet thickness, steel 600 N/mm² 2.5 mm
Maximum sheet thickness, aluminium up to 250 N/mm² 4 mm
General  
Maximum joining force 25 kN
Maximum stroke rate 2 1/s
Minimum edge spacing 8 mm - 58 mm
Maximum flange height (B) 36 mm
Nominal power consumption 1700 W
Weight  
Weight 8.3 kg
Dimensions  
Length 411 mm
Height 358 mm

Order a call

Full Name: *

Phone: *