Salvagnini P4 - 3220
Range of automatic panel benders
The P4 panel bender natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools.
The P4 panel bender natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools.
Flexible automation
It uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual re-tooling, allowing batch-one or kit productions.
It uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual re-tooling, allowing batch-one or kit productions.
Sustainable technology
The technical solutions adopted (Direct Drive and pneumatic and electric actuators) allow it to respect both people and the environment without reducing its productivity. It runs with a minimum quantity of long-life oil, inside a fully sealed circuit.
Adaptive system
The integrated adaptive technologies (advanced sensors, bending formula, MAC3.0) make the system intelligent and able to automatically adapt to changes in the material and the external environment, eliminating waste and corrections, and extending the range of products that can be made.
Connectivity 4.0
The proprietary LINKS and OPS software establish communication between the system and the company departments involved in the production flow.
Maximum length of incoming sheet [mm] | 3850 |
Maximum width of incoming sheet [mm] | 1524 |
Maximum diagonal that can be rotated [mm] | 4000 |
Maximum bending force [kN] | 660 |
Maximum clamping force [kN] | 1060 |
Maximum bending length [mm] | 3200 |
Maximum bending height [mm] | 203 |
Minimum thickness [mm] | 0.5 |
Maximum thickness and bending angle steel, UTS 410 N/mm2 [mm] | 3.2 (±90°) 2.5 (±130°) 2.1 (±135°) |
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 [mm] | 2.5 (±90°) 2.1 (±125°) 1.6 (±135°) |
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 [mm] | 4.0 (±120°) 3.5 (±130°) 3.0 (±135°) |