THOMAS ZIP 30 DA Gravity down feed bandsaw

Auto pull down horizontal bandsaw for small and medium sized ferrous material. The saw allows to make any cut without the constant presence of the operator through the original hydraulic control system for descent of the sawframe, at variable speed rate according to the material to cut.

One way miter cutting (from 0° to 60° right).
Two cutting speeds.
New hydraulic cylinder in  aluminium.
Hydraulic regulator to control the  sawframe  down feed.
Blade rotation start switch with maintainded  action on the sawframe  grip.
Coolant liquid with  electropump.
Pedestal in steel plate.

DA cutting cycle 
The cutting operation, thanks to the DA device, is effected automatically through the sawframe downfeed at controlled speed by hydraulic regulator. At the end of the cut, blade motor and electropump for coolant liquid stop automatically. Sawframe rises manually. Manual vice opening and closing.


TECHNICAL FEATURES 
Vice and  sawframe  in cast iron to provide high stability and vibration free cutting. 
Precision blade guides with hard metal pads and adjustable bearings. 
Bench and pedestal in steel plate.
Reduction unit with  grears  in oil-bath.
Anti-corrosion treatment with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision.
Electric installation according CE regulations.
Control   pannel     setted    on    a   fixed   arm  support.
Set of fuses against current overload.
Motor protected thermal feeler. Safety microswitch on the blade protection. 
Severe tests on mechanical tolerances, electric installation and final performance test.


STANDARD EQUIPMENT
Set of service spanners.
Bar stop rod with millimiter scale.
Material support.
Bi-metal saw band 2450x27x0,9.
Certificate of conformity and instruction manual according to Machine Directive 2006/42/CE.


ACCESSORIES
Rollerway on loading side 2 mt
Rollerway on unloading side 2 mt with bar stop


3Ph Electric motor

kW

0.75 - 1.1

Electropump

kW

0.07

Gearbox reduction ratio

I

40/1

Flywheel diameter

mm

290

Blade dimension

mm

2450 x 27 x 0,9

Cutting speed

m/1'

32/64

Vice opening

mm

250

Sawframe inclination

°

40

Working height

mm

980

Machine dimension

mm

1400 x 750 x 1500

Weight

kg

230

Order a call

Full Name: *

Phone: *